How To Open Electric Razor To Clean

What yous need

A bristle brush: Getting rid of all the small $.25 of hair that fall in between blades is important for keeping a razor fresh and performance. Most electrical razors and clippers come with a pocket-size plastic castor for this, but if you've misplaced information technology, an quondam toothbrush works fine.

Soap: If you lot're washing a waterproof electric razor, liquid soap and water volition make clean your shaving block just fine. Merely if y'all're cleaning clippers, trimmers, or a non-waterproof razor, y'all'll need to utilise the spray cleaner we mention below.

Blade lubricant: In order to keep the blades abrupt and working properly—and to avoid overheating and overworking the mechanics of your razor—you'll need to proceed the cutting block lubricated. Most razors come up with a small bottle of oil that volition serve yous well for a long time, since yous don't need more than than a drop or 2. But if you've lost or used up that bottle, there are a lot of replacement options.

How long will this take to clean?

Close up of a person using a small bristle brush to remove debris from the cutting block of the Braun Series 7. — The Braun Series vii uses cartridges that keep the blades cocky-contained, so this may await different on your razor. Photo: James Austin

Information technology takes simply a few minutes to effectively make clean your electric razor or trimmer. It'due south important to make cleaning your razor or trimmer a regular function of your routine. Otherwise, DeAngelis warned, you may experience some pulling or discomfort while shaving.

If you get into the habit of cleaning and maintaining your razors after every employ, you'll have a razor that non only works better for longer but besides delivers a reliable shave every time.

Make clean out the hair, and launder if possible

Close up of a person using a small bristle brush to remove debris from the cutting block of the Panasonic Arc5. — The Panasonic Arc5 connects the blades directly to the body of the razor, like most electric razors. Photo: James Austin

For electrical razors, you're going to want to remove whatever of the bits of hair that are in the cut block. With near razors, that means pulling off the foil cover (or opening the comprehend, if y'all have a rotary shaver) and lightly brushing off the debris you find.

If your razor is waterproof—all of our picks are—close the shaving block, or put the foil back over the blades and lightly run it under some water. Apply a dab of liquid soap to the cutting surfaces, and so run the razor for about 15 seconds before rinsing it out. After rinsing, accept the cake autonomously again, and let all of the components air-dry out completely.

Close up of a person holding a waterproof electric razor with suds on the foils. — Photo: James Austin

If you don't have a waterproof razor, spray the foils and blades two or three times with the cleaner of your choice. DeAngelis recommends Andis Cool Care Plus.

These sprays are designed to practise a lot of the aforementioned disinfecting and cleaning of soap and water, but without getting the shaver moisture. The sprays leave a thin film of lubricating oil on the blades—merely information technology's withal expert do to put an actress drop of oil on the blades later on.

Let your shaver dry completely before reassembling.

The clean and lubricated cutting block and body of an electric razor. — Photograph: James Austin

Lubricate the blades

In one case the blades are make clean, it'south of import to supervene upon the oil on them. The key to keeping your blades in the best condition is to add together a drop of oil afterwards each utilize, according to DeAngelis.

Apply a drop of oil to each cutting surface, and run the shaver for about 20 seconds, to spread the oil around. Then use a paper towel to gently remove any excess oil.

Close up of a bottle with an applicator applying a drop of oil on the blades of an electric hair trimmer. — Photograph: James Austin

Cleaning clippers or trimmers is a like process, but DeAngelis recommends using spray cleaner instead of getting your clippers or trimmers wet. Brush off the blades every bit you would with the electric razor, spritz the blades with a spray cleaner, permit dry out, and add a drop of oil later on.

This article was edited by Connor Grossman and Alejandra Matos.